Ten-Haaft Oyster V Vision Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 32

Ten-Haaft Oyster V Vision Скачать руководство пользователя страница 6

6

2. CONTROL ELEMENTS

2.1 Control panel

All controls are handled via the control device.

Vision

On / Off

You may choose any location you like to install the control panel, but please bear in mind that it is not water-
proof. You may still need to remove the protective film from the display.

The display of the control device will show the various operating modes of the system. We recommend that the
control device is positioned in an accessible location where it is easy to see this information.

The display is illuminated, so it is not a problem if it is installed in a very dark location.

To ensure safe and reliable operation of the system, please make sure the external unit is in rest mode before
disconnecting the control device. Check that no text is displayed on the device – this is an indication that the
system is in rest mode.

There is a separate manual – "Installation Instructions" – that covers the installation, wiring and initial
taking into operation of your Vision system.

«
...
4
5
6
7
8
...
»

Содержание Oyster V Vision

































Отзывы:

Нет отзывов