Ten-Haaft Oyster V Vision, Руководство оператора, Страница: 4 / 32

4
The manufacturer has designed your satellite system to be connected to standard on-board electrical systems
with a rated voltage of 12 V / 24 V DC.
The manufacturer accepts no liability for direct or indirect damages or for consequential damages to the system
itself, to battery systems, motor vehicles or other equipment or goods resulting from installation or wiring errors.
Please also observe the following instructions from the manufacturer:
• The system must only be installed on hard vehicle roofs which are sufficiently strong and inherently stable.
Observe all relevant and approved guidelines of the automotive industry.
• The product does not require any regular maintenance. Opening housings and enclosures is not permissible.
Inspection and maintenance may only be performed by a qualified professional.
• Avoid cleaning your mobile home or camper trailer with the mounted satellite system in a single-bay or drive-
through car wash, and do not use a high-pressure cleaner.
• Any modification of the overall system by removing individual components or adding other components is
not permissible. It is not permissible to use any parabolic antennas or LNBs other than the original parts.
• Installation must only be performed by sufficiently qualified personnel. The installation manual supplied as
part of the operator manual must be carefully followed. If you encounter any problems, or if you are unsure
about anything, please contact the manufacturer or an authorised service partner.
Retract the system during storms (75 – 80 km/h; 8 Beaufort).
If the vehicle moves or is transported in reverse at speeds above 30 km/h, especially when being transported by
truck or train, the antenna must be secured against unintended unfolding by suitable means (see 1.4 Safety
precautions, page 5).
1. GENERAL INFORMATION