Advanced Remote Control Programming
Change from a Tandem
System to a Single System
This function will separate a Tandem System, resulting
in two Single Systems. This will allow each base to be
individually controlled by their respective remotes.
STEP 1
Perform
System Reset
on page 19 for Remote 1 and
Base 1.
STEP 2
Perform
System Reset
on page 19 for Remote 2 and
Base 2.
NOTE: After the system has been reset, press
any button to return remote to base settings.
If reset was unsuccessful, press and hold the
LEARN button on the Control Box until it has
blinked three (3) times, then press again ONCE.
CUSTOMER SERVICE: 1–800–821–6621
21
