Installation
NOTE: Always keep the TEMPUR-Ergo
™
Plus in
a flat, horizontal position during transportation
and delivery. Always open the box in the flat
position.
STEP 1
Carefully take base in the carton to the bedroom and
place next to where the customer wants it set up.
STEP 2
Carefully lift the TEMPUR-Ergo Plus out of the
shipping carton, keeping the unit topside down.
For safety reasons, this should be performed by
two people.
NOTE: To avoid damage
to the adjustable base,
always open the carton
while the bed is in the
flat position.
STEP 3
The products come packed in a cardboard box.
Some components are also sealed in plastic film.
To unpack, proceed as follows:
STEP 3A
Remove the cardboard and plastic film from the
components.
STEP 3B
Check the package contents.
STEP 3C
Dispose of the packaging materials.
STEP 3D
Keep the user manual at hand for the operators.
Delivery Procedure
STEP 4
Remove the remote control and (2) AA batteries
from the accessory pack, remove the cover from the
remote control’s battery compartment, and install
the (2) AA batteries into the remote.
Install (2) 9-Volt batteries into the battery
compartment of the power supply.
NOTE: Do not mix old and new batteries.
STEP 5
Attach TEMPUR-Ergo Plus Legs: Open the
accessories box, take out the (4) legs, and thread
them in a clockwise direction into the pre-threaded
holes in the frame.
NOTE: Hand tighten the legs securely to the
frame. DO NOT over tighten. Make sure the legs
are screwed completely into the frame. Legs
that are not securely attached may become
unsafe. DO NOT unscrew a leg to compensate
for an uneven floor.
NOTE: Locking casters are available for
aftermarket purchase. In order to prevent the
movement of this product, all four casters
should be in the locked position.
13
CUSTOMER SERVICE: 1–800–821–6621
