Tempsens CALsys 1700 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 16

Tempsens CALsys 1700 Скачать руководство пользователя страница 16

www.tempsens.com

ABOUT US

Tempsens Instruments (l) Pvt. Ltd.

Tempsens Instruments (I) Pvt. Ltd. is a part of Pyrotech Group which was established by four technocrats in 1976 at
Udaipur, with their first product as Thermocouples and RTDs. Today ‘Tempsens’ is one of the largest manufacturers of
Temperature Sensors in India.
Tempsens Instruments (I) Pvt. Ltd. U # II was started in 2009 to produce cables with high standard of manufacturing
process conforming to national & international specifications. We manufacturer wide range of cables for Temperature
sensors  and  Instrumentation  in  various  insulations  as  PTFE,  FEP/PFA,  Kapton,  Silicon,  Fiber  Glass,  Ceramic  Fiber,
Refrasil/Nextel, PVC etc. in variety of configurations. These cables are available in temperature range -60°C to 1200°C.
All  our  products  are  manufactured  under  strict  ISO-9001  quality  management  system.  We  also  provide Calibration
Certificates with all cables. We stock most types of cables which enable us for fast delivery of goods. Our engineering staff
are capable to custom design solutions for all applications for customers.
We  are  dedicated  to  provide  the  highest  quality  products  that  meet  our  customer's  specifications  for  various
applications.
We continuously focus on improving our manufacturing processes and competitiveness in the industry

TEMPSENS INSTRUMENTS (l) PVT. LTD. U#ll

«
...
14
15
16

Содержание CALsys 1700

















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды