Tempsens CALsys 1500 BB, Руководство пользователя

Страница: 6 / 17

P: PHASE= RED WIRE
N: NEUTRAL = BLACK WIRE
E: EARTH =BLUE WIRE
4. Overview
4.1 Introduction:
The ‘CALsys 1500BB’ provides a stable temperature source for laboratory calibration of
radiation thermometers by comparison method up to a temperature range of 1500°C.
The ‘CALsys 1500BB’ model has been designed in single part. This model provides an
isothermal enclosure in which the Non contact pyrometers can be checked against the
temperature of the black body. For traceable calibration a master pyrometer should be used.
The units’ features emissivity of 0.99, thus offering the closest approximation of a target
surface that is a perfect emitter of infrared energy.
The ‘CALsys’ models are part of wide range of calibrators designed and made by us. Please
contact us in case you require more information about our other pro-ducts.
DANGER! Power is present even if the front panel circuit breaker is in the OFF (0)
position.
4.2 Outline Description:
‘ Calsys 1500BB is a transportable unit designed for use on any reasonable flat surface. The
target is a ridged aluminum plate which is painted by a high emissive paint .The target is
heated by
Silicon Carbide Spiral Rod Heater
which allows the source to heat up to 1500°C in
about 2.5 Hrs and hold it stable at temperature within ±1.0°C. The heater blockhouses consists
a heater & the controller sensor. The temperature controller to sense the block temperature
uses this sensor. To obtain the maintain a required temperature the controller varies the power
to the heaters via a solid-state relay.
[!]Warning: Do not insert impure materials, metal objects or probes etc. into the
block.
4.3 INSTALLATION OF CALSYS 1500BB
Unpack the furnace carefully and inspect it for any
damage that may have occurred during shipment.
If there is shipping damage, notify the carrier
immediately.