Tempsens CALsys 1500 BB, Руководство пользователя

Страница: 10 / 17

5. Operating Instruction
(1) PID Controller
(2) ON/OFF switch of controller
(3) Power Cable
(4) RS-232
(5) MCB (for Heater)
(6) Safety controller for over heating temperature.
(7) 1."R" type thermocouple Duplex for controlling and
over temperature protection.
Inner chamber of calsys 1500BB
5.1 Power
Plug the black body power cord into a mains outlet of the proper voltage, frequency and current
capability. Typically this will be (230 VAC±10%, 50-60 Hz). Turn on the black body using "Mains"
switch loacated at rear side. The black body will turn on and begin to heat for previously
programmed set point.
5.2
Setting the Temperature
Press “UP” or “DOWN” buttons to change the change the
temperature set-point value. When the set-point temperature is changed the controller