Tempsens CALsys 1200, Руководство пользователя

Страница: 10 / 13

8. Software Installation
The provided Tempsens software offers possibilities toconnect furnace temperature bath and
change set point,maximum time span, view real time graph andevaluate measuring data.
1.1 Installation
Install the calibration software using the installation guide file on CD ROM. After installation of
the software; Double click the application. It willopen the screen of software.
1.2 Parameter in mainscreen
1.2.1 Communication
Communication between the furnace and the software is implemented via a RS-232 cable
connected between the furnace and the PC serial port. This enables the acquisition and
recording of data, as well as the transfer of commands from the software application to the
Tempsens furnace. Communication can be done by clicking on connect and select correct COM
port address (fig. 1) where furnace is connected. Also user has to select type of controller
version3216 (fig. 2). Then click on CONNECT button. Shown com2 connected successfully.