KEB 16400C
Battery Crimping Tool
www.grupotemper.com
Crimping die:
16.25.35.50.70.95.120.150,185,240,300,400mm
2
Battery:
2 pcs
Charger:
1 pc
Sealing ring of cylinder:
1 set
Sealing ring of safety valve.
1 set
2.
Description of components:
Parts No.
Description
Function
1
Pin
For fixing die
2
Die
For crimping, interchangeable die
3
Retaining clips
For locking/unlocking die.
4
Limited screw
For prevent head from dropping or popping.
5
LCD
Showing the data (crimping times, electricity
capacity, error information)
6
Keyboard
For power switch, function switch, LED light switch
7
Crimping head C crimping die, for fixing the crimping die
8
LED indicator
For lighting
9
Trigger
For operating or retracting the piston in case of
incorrect operation.
10
Lock
Locking the battery
11
Battery
For supplying power, rechargeable Li-ion
（
18V
）
.
3.
Function description
MCU –automatically detect the pressure during operation and provide
Security protect, shut off the motor and reset automatically after
operation.
Auto reset- Release the pressure automatically, retract the piston to the
starting position when reached the max output.
One key control- press the trigger to start working, half loosing the trigger
means stop forcing pressure, loosing fully means piston return to the
original position.
The unit is equipped with a double piston pump which is characterized
by a rapid approach of the die towards the connector and a slow crimping
motion
The head can be smoothly turned by 350° around the longitudinal axis
in order to gain better access to tight corners and other difficult working
areas.
Suspend—finish working or withdraw the hand from the trigger or any
accident happened, the device inside of the tool can stop power supply.
One significant sound will be heard and a red display flashes if any error
occurs or lower power being.( Ref. table 1)
Per time pressing on the trigger, the LED will lighting for 20
seconds.
High-performances Li-ion battery in strong power supply, No discharge
