KEB 16400C
Battery Crimping Tool
www.grupotemper.com
memory effect., Ultra lower power consumption standby design
keep the
tool 6 months storage, meanwhile over discharge device prolong the life
span of the battery.
A temperature sensor makes the tool stop working automatically when
the temperature over 60
℃
under long time working, the fault signal
sounds, it means the toll can’t continue work until the temperature reduce
to the normal.
Micro computer control system with the feature of self-pressure detecting,
double protection during operation, counting and realize the exchange
between computer with data by the converter.
Table 1.
Series
No
Error code
Instruction
What it means
1
On ---
Self-checking
Self-checking to assure
everything is ok
2
E01
Overload
Hydraulic system may
damaged and need
check immediately
3
●●●
Charging
signal
Lacking power and need
charging.
4
●
—5sec
Power lacking
warning
No power and need
charging immediately
5
E02
Sensor error
Temperature sensor and
power inspecting error
6
E03
●●●●
Temperature
warning
Temperature too high,
tool need to be cold
7
E04
●●●●●
No pressure
Motor working but
without pressure
OPERATING INSTRUCTION
Read the entire SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before using this product.
Use this tool for the manufacture’s intended purpose only. Use other than that which is
described in this manual can result injury or property damage.
1. Charging
Push battery into charger and connect the plug with the plug seat. Make sure the room
temperature is between 10
℃
-40
℃
。
The charging time is around 2 hours. Please see the
illustration below.
