KEH-10150
Hydraulic Crimping Tool
www.grupotemper.com
5.
Fully insert the cable into the barrel of the connector
6.
Continue pumping the tool handle to crimp the connector completely. The internal
safety valve will automatically activate when full pressure is reached. The handle
pressure decreased is indicated by a significant sound.
7.
To release, depress the release lever. The piston will retract and take out the
connector; the tool is ready to begin its next cycle.
MAINTENANCE AND SERVICING
Damaged equipment can fail, causing serious personal injury. Do not use damaged
equipment. If abnormal noise or vibration occurs, have the problem corrected
before further use.
1.
BEFORE EACH USE,
inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, and any
other condition that may affect its safe operation.
2.
AFTER USE,
depress the release lever to activate the piston to the end, clean
surface of the tool with clean, moist, smear the rust preventing oil on the metal
surface of the tool and the dies to avoid rusty. Store the tool in the dry environment.
3.
Service to the tool should only be done by a qualified Service Technician.
4.
in order to prolong the life of the tool please change the oil per year. Make sure the
oil filtered by 120 mesh net or over 30µm strainer. Meantime avoid the dusty into the
oil cup.
How to change the oil:
