TEM EX10200006, Руководство пользователя

Страница: 6 / 164

5
NOTE
: Unit price will be cleared each time after product has been weighed. (When the weighing
plate is empty). To prevent this, press “SABİT” key after entering unit price. To cancel automatic clearing
of unit price permanently, turn OFF “Temporary Unit Price” mode using settings menu 3.2.
ASSIGNING THE UNIT PRICE TO P1-P30 PRICE LOOKUP KEYS (PLU)
Press one of the P1,…,P30 keys for at least 3 seconds that you want to assign the unit price. (A long
“Beep” signal will be heard. Number of PLU key you entered will be displayed for a while). Press key to
reach PLU’s between P16-P30 located at the bottom of PLU keys.
ASSIGNING THE UNIT PRICE TO P31-P250 PRICE LOOKUP VALUES (PLU)
There are 250 PLU’s available. To use the PLU’s between 31-250, follow the below steps:
Assigning the unit price to a PLU:

Enter unit price using numeric keypad.

Press PLU key for at least 3 seconds. “PLU” will start flashing.

Enter the desired PLU number using numeric keypad. (For ex.; press “7” & “1” keys to assign
the unit price to PLU 71). After 3 seconds, a long “Beep” will be heard. Saved PLU number
will be displayed for a while.
Recalling the unit price from a PLU:

Press P key. ”PLU” will be displayed.

Enter the required PLU number. (For ex.; press “7” & “1” keys to recall the unit price
assigned to PLU 71). Unit price and the total price to be paid will be displayed.
WEIGHING WITH TARE

Place the tare weight on the weighing plate. Wait until the Equilibrium indicator is on. Tare
weight will be displayed.

Press Tare key. “dara” will be displayed for a second then “0.000” will be displayed. NET
indicator is ON. Tare symbol is flashing (only for LCD display). Tare has been weighed.

Place the product on weighing plate. Wait until Equilibrium indicator is on. Product’s net
weight will be displayed.

Empty the weighing plate. Wait until the Equilibrium indicator is on. NET and Tare indicators
are off. Tare is cancelled automatically.
Preset Tare:

Tare value can be entered by using numeric keypad.

Press EL key. “EL” will be displayed. Weight display is empty.

Press Tare key. “0.000” value will be displayed. (for 30 kg 2x3000 zero value is “0.000”)

Weight value can be entered by using numeric key pad “0”,”1”,…”9”. If 1 kg Tare value will
be set for 30 kg 2x3000 weighing instrument, “1.000” must be entered.

Press F key to set & save the tare value. In this mode, tare will not be cancelled when
weighing plate is empty.