Instructions for use and maintenance
Electric motors 50-400 V CA
Page
20
of
22
11.3
Compliance Electromagnetic Compatibility
The motors described in this manual can be deemed to comply with EN61000-6-4 and EN61000-
6-2 on Electromagnetic Compatibility 2014/30 EU because the motor itself is not a source of
noise being similar to an induction motor (as indicated on the EU Guidelines for the application
of the E.M.C Directive).
Compliance with the above mentioned standards must be verified for the motor-driver package
(even when the two components taken individually are compliant).
For the proper functioning of the system also the signal and power cables must be shielded, the
shielding must be with radio frequency connection (360 º) and cover at least 90% of the length
of the cable.
The connections on the motor shall only be made using the connectors and terminal blocks
provided for the motor.