56044702 16
© 2012 Telular Corporation
Antenna Options
Antenna problems are unlikely unless the premises are located in a
fringe network coverage area, in a building below ground level, or in a
metal structure. If you require a higher gain antenna or a longer cable
assembly please contact your Telular Sales Representative at 800-229-
2326, option 5. Telular offers a variety of high quality low loss antenna
cables as well as high gain antennas.
Step 3: Program, Activate & Transmit Alarms
Confirm that the Telguard enables the host alarm panel to transmit
alarm signals over the cellular radio network. The Telguard unit will
confirm activation with the Telular Communication Center if the
registration form was submitted prior to installation. During the
processing of the first alarm signal over the cellular network the
Telguard will transmit all of the parameters from the Telguard along
with the information (central station number and account code) from
the alarm panel. Once this information is received, the TCC will transmit
a message back to the Telguard indicating that the unit is activated.
Once this message is received the LED’S on the unit will begin
operating in normal mode; LED #1 will be on solid.
The first alarm is to confirm registration and activate the Telguard unit.
The first alarm will NOT be transmitted to the central station.
Special LED Indications during Activation
If the Telguard fails the activation process, it will be displayed on the
LEDs.
If LED #1 and LED #4 are flashing, the Telguard serial number
is not in the database at the Telular Communication Center.
Call Telguard Technical Support to verify correct serial
number.
If all of the LEDs are flashing, the activation message was NOT
received at the TCC. Retry transmitting the activation
message. If the TG-1 Express fails a second time to register,
