Phonecell
®
SX5T CDMA
14
User Manual
SX5T CDMA FWT WITH FAX
The SX5T CDMA FWT with Fax allows
connection to a fax machine and
additional telephones. Simply connect
your phone(s) or fax machine(s) to either
or both of the RJ-11 jacks on the side of
the SX5T.
Fax Timing Adjustments
Phase D adjustments can be made to analog faxing. If you experience faxing issues try adjusting
this setting.
Press:
# * 133 * <control> * <time out> #
Analog Fax Bypass
This feature allows the phone jack to process the next outgoing call as an analog fax call. After
this call, the phone jack automatically returns to the default voice protocol. The user enters this
key sequence prior to dialing the telephone number. The terminal interprets the string and prop-
erly sets up the call. Refer to the following examples.
NOTE:
The analog fax bypass string can only be used in single jack operation.
Use the Fax Bypass
1. Lift up the handset (take off-hook).
2. Press:
#
*
19
*
1 #
, then dial the fax number to be called.
3. Press START on the fax machine.
HINT:
If the fax machine does not have a handset, enter
#
*
19
*
1 #
, followed by the
remote fax number to be called. Press START.
HINT:
If the fax machine has the capability to store telephone numbers for speed dialing, the
#
*
19
*
1 #
command string may be programmed into the machine as a prefix to the telephone
number. With some machines, it may also be possible to store the command string as a speed
dial number and dial the remote fax machine telephone number manually.
Figure 12 -
Connecting a Phone and a Fax.
Parameter
Values
<control>
0 = Disable
1 = Enable
<time out>
1 - 255 in 15ms steps
