Call Alert Tone
The following key sequence is used to set the call alert tone:
Label: CALL ALERT
TONE
Data: <tone
number>
The tone value is set to 1 for medium tone, 2 for low tone, and 3 for high tone. If the tone num-
ber is not in the range of 1 to 3, it is considered invalid. The factory default is
1
.
Auto Send Delay
The following key sequence is used to enter the auto send delay:
Label:
AUTO SEND DELAY
Data:
<delay>
If the delay is not in the range of 2 to 20 seconds, it is considered invalid. The factory default is
3
.
RSSI Display Type Option
The following key sequence is used to select the RSSI display option:
Label: RSSI
DISPLAY
Data: <type>
The type value is set to
0
for direct readout in dBm or
1
for bar graph. If the RSSI display type
value is greater than 1, it is considered invalid. The factory default is
1
.
LCD Display Contrast
The following key sequence is used to enter the LCD Display Contrast:
Label: LCD
CONTRAST
Data: <contrast>
If the LCD contrast is not in the range of 0 (darkest contrast) to 19 (lightest contrast), it is consid-
ered invalid. The factory default is
5
.
Zero Delay Dial
The following key sequence is used to enter the Zero Delay Dial option:
Label: ZERO
DELAY DIAL
Data:
<zero delay dial>
The zero delay dial value is set to
0
for Disable and
1
for Enable. The factory default is
1
(Enable).
Mobile Identification Number (MIN)
The following key sequence is used to view the SX4
P
MIN (phone number):
Label: MIN:
_ _ _ _ _ _ _ _ _ _
This is a read-only feature and is not user programmable.
Phonecell SX4
P
TDMA 800
12
User Manual