Phonecell SX4
P
TDMA 800
11
User Manual
PHONECELL SX4
P
USER SET-UP
The SX4
P
has several programmable options for unique customer or network applications.
These options are stored in the SX4
P
’s non-volatile memory and are retained during power
cycling.
Set-Up Mode
The SX4
P
’s non-volatile memory can be accessed in the User Set-Up Mode. The handset must
be “on-hook” before entering the set-up mode. Normal Mode operation is suspended during set-
up and is available when the set-up mode is exited.
To enter the user set-up mode, press and
hold the Star (*) key, then press the “Flash” key.
The PM icon will display on the LCD.
Overview:
1) Stored data appears on the Dialed Digits (middle) row of the LCD.
2) A descriptive label appears on the Indicator (bottom) row of the LCD.
3) The Up/Down keys are used to scroll through the menu items.
4) Pressing any numeric key when a label is displayed causes:
• The Dialed Digits row to turn off
• The NEW icon to illuminate
• The pressed key to appear at the rightmost Dialed Digits row position.
5) Pressing the Redial/Hands-Free key after a numeric entry will attempt to store the data.
6) A correct entry will cause the NEW icon to disappear and the new stored data to be displayed
on the Dialed Digits row.
7) An incorrect entry causes the Dialed Digits row to flash. When a numeric key is then pressed,
it causes:
• The Dialed Digits row to turn off.
• The NEW icon to remain displayed.
• The pressed key to appear at the rightmost Dialed Digits row position.
8) When entering data, the NEW icon is displayed. Pressing the Flash key at any time will cancel
the operation and redisplay the stored data on the Dialed Digits row. The NEW icon will then
turn off.
Exit User Set-Up Mode
The User Set-Up Mode can be exited by any one of the following:
• Going “off-hook” (picking up handset)
• Failure to enter any digit within two minutes.
The PM icon is then turned off, returning the SX4
P
to the Normal Mode.
PHONECELL SX4
P
USER SET-UP COMMANDS
The following commands are displayed when in the User Set-Up Mode. An <entered value> is
comprised of the digits 0 through 9.
Call Alert Volume
The following key sequence is used to enter the volume of the call alert:
Label: CALL ALERT
VOL
Data: <volume>
The volume value is set to
0
for off;
1
for low; and
2
for high. If the volume value is greater than
2, it is considered invalid. The factory default is
2
.
Message Alert Volume
The following key sequence is used to enter the volume of the message alert:
Label: MSG
ALERT
VOL
Data: <volume>
The volume value is set to
0
to for off;
1
for low; and
2
for high. If the volume value is greater
than 2, it is considered invalid. The factory default is
1
.