manualshive.com logo in svg

Teltronics SEB NET-PATH, Инструкция по установке и эксплуатации

Поделиться
Скачать
Teltronics SEB NET-PATH Скачать руководство пользователя страница 16

Notices

x

The warranty of repair or replacement at Teltronics' facility contained herein shall be 
the exclusive remedy for breach of warranty and shall be in lieu of and excludes all 
other express or implied warranties of merchandise, fitness, or otherwise.

Teltronics shall not be liable for any special or consequential damages or for loss, 
damage or expense arising from delays in delivery, use of the equipment or arising 
from the inability to use the equipment with any other equipment or from any other 
cause.

Spare Parts. Teltronics recommends that spare parts be maintained by those 
responsible for sustaining end-user, Teltronics equipment. Recommendations for 
spare parts inventory can be obtained from Teltronics upon request.

Spare parts for emergencies can be obtained from Teltronics, when available, at the 
customer’s expense. Such spare parts will be new or reconditioned parts and will 
carry a new parts warranty of ninety days from the shipping date.

Return Authorization. A return authorization number must accompany all 
equipment returned to Teltronics for repair or replacement. This number is obtained 
by telephone from the Customer Repair Department of Teltronics. This number shall 
be used for all paperwork or telephone transactions between the customer and 
Teltronics and shall be included in the shipment of the returned equipment and clearly 
marked on the outside of shipping containers.

A description of the mode of failure or exhibited trouble symptoms shall also 
accompany the equipment in order to assist Teltronics in better serving the customer's 
needs.

When equipment returned for repair is found to be free of defects, the customer will 
be billed in accordance with the then-current out-of-warranty repair charges.

Design Changes. Teltronics reserves the right to make any changes in design or 
construction of its products at any time without incurring the obligation to make any 
change whatsoever to products previously shipped.

Содержание SEB NET-PATH



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды