21
21
In order to save valuable space in SMS, some of the parameters have short values,
Parameter
Value (as visible in SMS)
Description
0
GPRS is not active
GPRS
1
GPRS is active
0 Slave
mode
1 Master
mode
MODE
2 Master_ar
mode
0
Bearer is GPRS
BEARER
1
Bearer is CSD
0 Analog
CALL TYPE
1 ISDN
Table 7.4: Parameters and their values in SMS
Some of the configuration parameters names which are longer are being expressed in short form, as
shown in the table 7.4,
Configuration parameter
Configuration parameter
(as visible in SMS)
device_id DEV_ID
server_port SER_PRT
bearer_retry_timeout RETRY_TO
connection_timeout CONN_TO
csd_phone CSD_PH
auth_phone1,auth_phone2,auth_phone3,auth_phone4 AUTH_PH
[,,,,]
Table 7.4: Parameters and their short form in SMS
7.8 SMS formats
Authorized users can send SMS to WirelessCom/G10 to get information about configuration
parameters. There are 2 commands to which would WirelessCom/G10 would reply,
•
SMS sent to WirelessCom/G10 :
get1
•
Reply from WirelessCom/G10 :
DEV_ID[ ]GPRS[ ]MODE[ ]IP[ ]SERPRT[ ]APN[
]BEARER[ ][USR: ,PSWD: ]
•
SMS sent to WirelessCom/G10 :
get2
•
Reply from WirelessCom/G10:
DEV_ID[ ]AUTH_PH[ , , , ]CSD_PH[ ]CALL_TYP[
]BAUD[ ]RETRY_TO[ ]CONN_TO[ ]
