Teltonika GH4200, Руководство для продвинутых пользователей

Страница: 56 / 73

56
Alarm data is sent in case alarm was activated. Data can be chosen: Device configuration → Connections and Data →
Periodical and alarm data. In order to send alarm data it has to be configured using Track Assistant software: Device
configuration → Connection and Data → GPRS and Server columns.
Configuration
In order to use GPS data, GPS must be enabled: Device configuration → Tracking and Saving.
If data transfer to server is required you have to configure it using Track Assistant software: Device configuration →
Connection and Data → GPRS and Server columns.
Parameter Description
Save data to the memory
When location available only – saves data only when location is available.
Always – always saves data. It does not matter if coordinate was found or not. In
this case N/A (Not Available) will be displayed over coordinate.
Data sending order
Specifies the manner in which data is sent through GPRS.
Newest first – newest data will be sent first.
Oldest first – oldest data will be sent first.
GPS, GSM, Device info
In these fields you can choose what information in case of emergency (Alarm) or
periodically will be saved.
There are three main information categories: GPS information, GSM information and Device information.
Operation
If periodical data saving is enabled, device saves data to memory after time set in logging period (Device configuration
→ Tracking and Saving). Data is related to coordinate, so before saving data to memory, coordinate must be found.