Teltonika GH4200, Руководство для продвинутых пользователей

Страница: 31 / 73

31
GPRS data sending Device sends data through GPRS.
Man-down function
This function activates monitoring of device position. If position is changed, GH4200 activates PreAlarm, if this function
is activated and after PreAlarm time runs out alarm is activated. Device has to change its position by more than 45
degrees or fast position change must be monitored in order to activate PreAlarm. Consider the most stable position
while using Man – Down function. It is important to keep device in its own special case. Case must be attached to belt or
any place, which is stable while moving.
Man - down function can help when user can not activate alarm by button himself (example: loss of consciousness). Also
in other situations, where object movement is important this function is very handy.
Configuration
Man-down function can be configured in Track Assistant software: Device configuration → Alarm and choose Man Down
section. Detailed description is displayed in a table.
Parameter Description
Enable Enable/disable man-down function.
Base
position
This is a position, which GH4200 will use as true (normal) position. All other positions will be
treated as false ones and Alarm will be activated. There are 2 base positions to choose from:
Horizontal – horizontal position. Attention! GH4200 must to lay on the side which has USB
connectors on it.
Vertical – vertical position. Attention! GH4200 will use this position as its base only if it stands as
displayed in the picture:
Man – down function can be activated in two ways: in Track Assistant and with SMS request:
Parameter Description
SMS
request
Man-down function is enabled/disabled, when GH4200 receives this type of request message:
"psw:<password> mandown on" – enables.
"psw:<password> mandown off" – disables.
Example: psw:0000 mandown on.
If there is no password: mandown on.