Teltonika GH4200, Руководство для продвинутых пользователей

Страница: 40 / 73

40
1 – Parking function is activated. There is a movement. New coordinates are not found during entire
Coordinate searching timeout time.
2 – PreAlarm is activated after Coordinate searching timeout time runs out. Alarm is activated after
PreAlarm time runs out (there was a movement and location is not found).
Notice!
Parking function is activated again after Alarm ends. Device sets up new Parking zone and tries to get new
coordinates. Movement monitoring mode (Sleep mode) is activated.
Attention! When you are leaving parking zone, Parking function has to be switched off in order to avoid false Alarm
activation. Parking function has its own PreAlarm signal. It means that Alarm has another PreAlarm time. So
sequence will be like this PreAlarm (Parking) → PreAlarm (Alarm) → Alarm.
Detailed description:
Parameter Description
Parking Parking function activated/deactivated.
Coordinate searching timeout
Time, for how long device will try to get new coordinate. PreAlarm will be activated
after this time runs out.
Movement Movement of GH4200 (yes/no).
GPS GPS module turned on/off.
Fix New coordinate is found.
Parking event
Parking function event. Device left the zone or movement is recorded if new
coordinate is not found.
PreAlarm (parking) Parking function's PreAlarm.
Alarm Alarm mode.
Keyboard
Device has 5 configurable buttons and reset button. Keyboard helps user to control device. Every configurable button
can perform users set functions, for example: call, send SMS, activate alarms and configure the device.
Configurable buttons are numbered in the picture. The reset button is shown with the arrow. It can be pressed only with
something long and sharp like paper clip.