Teltonika FM3600, Руководство пользователя

Страница: 25 / 96

25
5.4.2 Trip
Trip customizable feature enables user extended monitoring of performed trips (from
engine start at present location to engine stop at arrived location), log their start and stop points,
view driven total distance
4
. Event will be generated (included into send records) only when trip
starts and finishes. This feature is available on all FM3620 hardware versions without limitations.
Note: Scenarios and Trip features are activated (DOUTs are activated) only if
DIN1=1 (ignition is on).
5.4.3 Geofencing
Geofencing is another feature which is highly customizable and can detect wherever car
enters or leaves customized areas. More about Geofencing can be read in 5.14.3 chapter.
Auto Geofencing feature if enabled is activated automatically by turning off car ignition.
Next time before driving user has to disable Auto Geofencing with iButton or by turning on car
ignition. In case of theft car leaves Auto Geofencing zone without authorization high priority
record to AVL application is sent automatically.
5.4.4 iButton list
iButton list is used to enter authorized iButton ID codes, which are used to authenticate
driver in Authorized driving and Auto Geofencing options.
5.5 CONFIGURATION
5.6 Configurator
New FM3620 module has default factory settings. Settings should be changed according to
your application and your GSM operator information.
FM3620 configuration is performed via FM3620 Configurator program. FM3620
Configurator version can be downloaded from http://avl1.teltonika.lt/downloads/FM36/ .
Contact sales manager to get the latest FM3620 Configurator version. FM3620 configurator
operates on Microsoft Windows OS and uses MS .Net Framework 3.5 or higher. Please ensure
that MS .Net Framework 3.5 or later is installed on your PC before starting configurator. Latest
MS .Net Framework version can be downloaded from official Microsoft web page.
Module configuration is performed over USB cable. Configuration process starts from
starting FM3620 Configurator program and then connecting to FM3620 device via Connect
button located on the top left corner of configurator. If connected successfully IMEI, Version
fields which were empty, now are filled with certain numbers depending on Modem IMEI and
firmware version of your device (figure below).
FM3620 has one user editable profile, which can be loaded from device, and saved. User
can also revert to default settings, by pressing Load Defaults button. After any modification of
configuration settings it has to be saved to FM3620 device, otherwise it will not be written to
device.
FM3620 has 2 configuration modes: Recommended Configuration (Figure 16) and
Advanced Configuration (Figure 17).
4
Continuous odometer – total driven distance, works only in TRIP mode. Continues distance is counted only
for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip will start counting
from the begining.