24
FM1010 Configurator is divided into 4 main areas: 1 – main button area, 2 – information
area, 3 –settings menu, 4 – parameters and values menu.
Main Buttons description:
‘Connect’ – connects device
‘Load’ – reads configuration parameters from FM1010 Flash memory.
‘Save’ – saves configuration parameters to FM1010 Flash memory.
‘Load Defaults’ – loads default FM1010 settings that later can be modified. This procedure
must be performed before entering new parameters.
‘Save to File…’ – allows user to save currently entered settings to .XML file, for later usage.
‘Load from File…’ – allows user to load configuration saved in .XML extension file.
‘Reset device’ – reboots FM1010 and displays processor firmware version.
Additional Buttons description:
‘SIM PIN’ - allows to enter PIN code if inserted SIM card has activated PIN code security.
Note that PIN code can be entered 2 times. After that SIM CARD must be removed from FM1010
and PIN code entered manually.
‘Add Keyword’ / ‘Change Keyword’ / ‘Switch Security Off’– buttons are used to protect
configurator from unauthorized access to configuration.
Keyword is 4 – 10 symbol length. If keyword is set, every time user reconnects FM1010 to
USB port, user will be asked to provide valid keyword when connecting FM1010 to configurator.
User is given 5 attempts to enter keyword. After entering valid keyword, counter resets to 5.
If user disconnects FM1010 using ‘Disconnect’ button and does not disconnect from USB
port, after reconnecting using ‘Connect’ button, configurator does not ask for keyword.
ATTENTION! If you have entered a keyword, disconnected from the
configurator and then later connected again, you will need to enter the
keyword that you have entered previously. If you have forgotten it, please
contact your local sales manager.
5.7
Record storage
FM1010 can store up to 8000 data records if GSM or GPRS is not available at the moment.
It will send data later when GPRS is available again. Note that FM1010 can have memory full of
records. In such case it will start deleting oldest records in order to save new ones. Sending all
the data records to server may take some time. Sending 8000 records for FM1010 may take for
about 2 hours (exact time may differ depending on GPRS/server load).
You can access all uploaded data from TAVL4 application.
More details on how to use TAVL application please refer to “TAVL4 application user
manual” documentation.
5.8
System settings
System settings have 4 configurable parameters:
Sleep settings, where user can turn sleep/deep sleep on or off;
Mode Switch Settings, where user can configure 3 ways how FM1010 will change its
working mode (for working modes, read section 5.134)
Содержание FM1010
Страница 1: ...FM1010 User Manual V1 2 ...
Страница 10: ...10 Figure 1 FM1010 view dimensions tolerance 1mm ...
