CONNECT THE DEVICE TO THE COMPUTER
CHARGER
U S E O N LY T H E B AT T E R I E S S U P P L I E D B Y T H E
MANUFACTURER
USE THE BATTERY SAFELY
SAFELY DISCONNECT THE DEVICE
Computers to be connected to the device may be stationary or
portable having an USB connection.
Chargers and personal computers must comply with the
requirements of DIN EN 60950-1.2003.
If a battery of an improperly sort is inserted, there is a possibility for
explosion or other harms.
Ensure that the battery
doesn't have a contact with water. When
storing, keep the device in a cool, dry place.
Ensure that the battery and device are not exposed to hot surfaces
or direct sunlight.
When transporting, ensure that the battery is safe from metal
articles and do not keep it with metal rings, chains, etc.
Do not damage the battery with nails or sharp objects.
Do not try to charge the battery directly from a household socket.
This may lead to explosion or other harms.
The device may be disconnected from the PC or charger by pulling
out the USB connection from the computer USB socket or by
pulling out the micro USB connection from GH1202.
To avoid mechanical damages, it is advisable to carry the equipment in a blow-proof
package.
The operation environment of the device has effect on its communication quality. If
the operation of the device has been disturbed, only qualified maintenance staff
may do the repair. It is recommended to deliver the device to a repair centre or back
to the factory.
Power supply chains available at a place used for connecting GH1202 must have
safety devices (automatic bipolar switch off devices) which protect from power
supply excess, short circuit and failure of grounding. The switch off device must be
installed at a place which is easy to access. Its power must be consistent with the
power of the connected device, and the distance between the contacts must not be
less than 3 mm.
3
Handheld GPS/GSM Tracker GH1202
User Manual v2.
2
4