TRACK ASSISTANT MONITORING TOOL
The Monitoring Tool is installed together with the drivers of the device. You can switch
it on within the program menu Start > All Programs > Teltonika > Track Assistant
Monitoring Tool. A special window will inform you about the activation of the program.
MONITORING GH1202 WHEN USING PC
The Track Assistant Monitoring Tool enables the user to manage GH1202 directly
from his personal or portable computer, which is connected to a GSM Modem. With a
GSM Modem (i.e. Teltonika ModemUSB/G10 ) connected to the personal or portable
computer, you can receive SMS messages with geographical coordinates from the
device and immediately track it on the map.
The quantity of SMS messages is not restricted since all SMS messages available in
the Modem may be stored in the computer memory and, thus, compile the whole
history of received or sent SMS messages.
By using the Track Assistant Monitoring Tool you may also request the device for
special SMS queries, which do not need to be memorized because they are already
programmed within the program.
Stored GPS Data can be reviewed directly from GH1202 (with the USB cable) and
can be shown on the map. You can store or export the data.
By using a special tool option, you will be able to set up to ten Geofence zones and
send the configurations with SMS messages by a Modem or record it directly to the
device if it is connected.
In addition, you will be able to store the data within the computer, review them or send
them to another person.
If you are using MS Virtual Earth map on your Track Assistant monitoring software
there you can see three kind of points: yellow, green and red. Yellow point shows if in
current position your speed was less when 5km/h, green – more when 5km/h but less
when 150km/h and red – more when 150km/h.
24
Handheld GPS/GSM Tracker GH1202
User Manual v2.
2
4