GEOFENCE ZONES AND THEIR DETECTION
This function enables to detect the Geofence zone where the device is located. The
user may set up to ten Geofence zones and dedicate names to them.
In the settings, you can provide the name of the zone Zone Name, geographical co-
ordinates of the centre of the zone Center Longitude, Center Latitude, radius of the
zone Radius (in meters) and thickness of the fence of the zone Fence Thickness.
If this function is activated by Enable Geofence Function, the device will check if the
zone fences are intersected. If the intersection of the zone fence (in both directions)
has been detected, the device will send a SMS message to all numbers available in
the list of subscribers' numbers under Alarm settings (Track Assistant Configuration
Tool).
If a SMS message has been sent to the device with a text GEO?, the device will detect
the zone where it is located, and if the device detects that it is located in one of the set
zones, it will send the name of this zone. If zone not detected, the device will send a
SMS message where the zone will be shown as unidentified (N/A).
If you wish to set the zones, click the button Geofence in the menu. If you set the
zones for the first time, the window Geofence Zones will be activated where you can
enable Geofence zones by clicking the link Enable Geofence Zones.
To set a zone, the following steps should be performed:
1
2
3
4
5
6
7
8
7
8
30
Handheld GPS/GSM Tracker GH1202
User Manual v2.
2
4