Teltone ILS-C Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 55

background image

ISDN Line Simulator User’s Manual

40-400-00012, Rev. E

16

To change the Phantom Power setting, follow these steps:

STEP 1

Run the Windows based configuration software.

STEP 2

Ensure the Switch Type is set to ETSI.

STEP 3

Change the Phantom Power setting to the desired state.

STEP 4

Select SAVE to save the configuration.

STEP 5

Remove all communications devices from the Simulator and

press the DOWNLOAD button. An automatic RESTART is
issued as part of the DOWNLOAD.

Caller ID

This service, also referred to as Automatic Number Identification (ANI) or
Calling Line Identification (CLID), allows Terminating Equipment with display
support or call screening features to identify the calling party before
accepting the call.

The ISDN switch knows each user’s identity because a SPID or Directory
Number is always associated with a specific line and user name. When a
user places a call, the switch accesses its database to retrieve the calling
number and includes it in the SETUP message sent to the called party. If the
called party supports a display, the calling party’s name and number may be
formatted into ASCII text and sent as well.

When the Simulator’s Caller ID setting is set to ON, any calling device, even
when it doesn’t include a Calling Party Number Information Element in its
outgoing SETUP message, is identified by the Simulator and presented to
the called party.

To change this setting and test the Caller ID features of a particular device,

STEP 1

Run the Windows based configuration software.

STEP 2

Select

Caller Identification.

STEP 3 C

hange the setting.

STEP 4

Select SAVE to save the setting.

STEP 5

Remove all communications devices from the Simulator and
press the DOWNLOAD button. An automatic RESTART is
issued as part of the

DOWNLOAD.

Note: When CALLER ID is set to OFF, the Calling Party Number is not
included in incoming SETUP messages.

Terminal Display Text

Many ISDN-BRI telephones, terminal adapters, and computer applications
support a display feature that accepts and shows formatted ASCII text
delivered by the network. The text may indicate an invoked feature or explain

«
...
22
23
24
25
26
...
»

Содержание ILS-C
























































Отзывы:

Нет отзывов

Похожие инструкции для ILS-C

Бренд: Camcar Страницы: 2

Бренд: Gates Страницы: 2

AJHVF21G - HD EVF - MULTI-LANG

Бренд: Panasonic Страницы: 4

Бренд: Banner Страницы: 2

Vodafone SGH-L810V

Бренд: Samsung Страницы: 93

MARTEN-FREE CAR

Бренд: Gardigo Страницы: 36

Бренд: IFO Страницы: 8

Бренд: Warrior Products Страницы: 2

Бренд: Pantech Страницы: 50

Бренд: Uniden Страницы: 16

Бренд: Uniden Страницы: 20

Бренд: UniData Communication Systems Страницы: 8

WPU-7700 Enterprise Edition

Бренд: UniData Communication Systems Страницы: 41

Бренд: Yealink Страницы: 2

Бренд: Rice Lake Страницы: 2

Бренд: ipf electronic Страницы: 4

Бренд: Vortice Страницы: 132

Бренд: CAME Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды