Getting started
7
IMPORTANT
Do not connect
the telephone line
until at least one
of the handsets is
fully charged. The
base station must
be plugged into the
mains power at all
times.
Which socket?
Power socket
Telephone line
socket
When the handset
is in the base or
charger, the red
Charging light stays
on and the battery
icon in the display
continues to cycle
from 1 to 3 bars even
when the batteries
are full charged.
Talk/Standby time
Under ideal
conditions, fully
charged handset
batteries should
give about 10 hours
talktime or 100 hours
standby on a single
charge.
2. Insert the 2 x AAA NiMH batteries supplied into the handset.
Slide the battery compartment cover into place.
3. Charge the handset for at least
16 hours
by placing the handset
on the base. The
red
charging
light comes on.
The handset is pre-registered to the base as
HS 1
.
This is shown on the display. When the handset is fully charged
the display shows the
BATTERY
symbol.
4. After 16 hours, plug the telephone line cord into your Telstra
F5050 base and the telephone wall socket.
Line cord
