Registering a Telstra F5050 handset
34
Registering additional handsets
You can register up to 5 handsets to your Telstra F5050 base unit.
If you have purchased a Telstra F5050 with additional handsets, the
additional handsets will need to be registered to the main base first
for them to work.
Registering a Telstra F5050 handset
1. If there is a handset in the base remove it whilst you are
registering the new handset.
2. Press
and hold
the
button on the base for about 10 seconds
until you hear a beep and the In Use light starts flashing.
3. On the handset to be registered, press and hold the
and
buttons together until display shows
bs
.
4. Enter the base number. If this is a new handset then enter the
base number
1
, after a delay the display shows
bs-1
then
PIN
.
5. Enter
0000
and registration starts. When the handset beeps and
returns to standby registration is complete.
