Technical information
41
Insert a Pause
When storing a number, press
and hold
until
P
appears in the
display.
Recall (R)
is used when connected to certain PABXs and some Telstra
network features, or those services available via your network
provider.
The default recall setting is option S (100ms), which is the standard
setting for the Public Telephone Network and most PABXs. Normally,
you will not need to change this setting. However, some PABXs may
require a longer recall, in which case option L (600ms) should be
selected.
1. Press
and hold
then
to display the current
settings (S).
2. Press
to toggle between the two available options, S and L.
3. Press
to confirm your selection.
Remote access code number
If you change the remote access code number, keep a record of the
new number by writing it in the space provided below.
■■■
■■■
