Telsa TS-2BTM658-DIX, Инструкция пользователя

Страница: 16 / 58

EN -16-
Accessories
Ice tray
• Fill the ice tray with water and place in
freezer compartment.
• After the water completely turned into ice,
you can twist the tray as shown below to
get the ice cube.
(In some models)
Please note that, depending on the ambient temperature, it may take 24 hours for your
fridge to reach the operating temperature.
• A 5 minute delay function is applied to prevent damage to the compressor of your fridge
when connecting or disconnecting to mains, or when an energy breakdown occurs. Your
fridge will begin to operate normally after 5 minutes.
• Your appliance is designed to operate in the
ambient temperature (T/SN = 10°C - 43°C) intervals
stated in the standards, according to the climate
class displayed on the information label. We do
not recommend operating your appliance out of
the stated temperature limits in terms of cooling
effectiveness.
Climate class Ambient (
o
C)
T 16 to 43 (
o
C)
ST 16 to 38 (
o
C)
N
16 to 32 (
o
C)
SN 10 to 32 (
o
C)
Icematic (Making ice cubes)
• Take out the ice making tray
• Fill the water to the line.
• Place the ice making tray in its original position
• When ice cubes are formed, twist the lever to drop ice cubes
into the icebox.
Note:
• Do not fill the icebox with water to make ice. This may damage it.
• The movement of the ice maker may be difficult while the
refrigerator is running. In such a case it should be cleaned by
removing the glass shelves.
(In some models)