79-070-0007/9, Issue 1
3-4
1. From the main PROGRAMMING SCREEN menu, access the
OC
→
OL screen and enter the "Edit units" mode <F9> for the
desired extension card (ELD, EHD). Program an available DN,
define the STATION TYPE as SD2 and set the Audio path as
single (S).
2. Access the FE
→
PK screen. Define an available station key
map number as SD. Enter the "Edit units" mode <F9> and pro-
gram the top 4 buttons (2 on the right and 2 on the left) with
appropriate features requested by the customer (Note: not
BM). These correspond to the four "Programmed" buttons on
the Telrad Tracker Set handset, as shown below.
3. Access the FE
→
CO screen and define COSs (for the COS
fields in the FE
→
AT screen) to include the following mandatory
field definitions:
ALL INTRUSION=N
ONHOOK INTRUSION=N
BARGE-IN STATION=N
HOT DIALPAD=N
CAMP-ON TONE=N
OFFHOOK RING=N
AUTO ANSWER=Y
BGM ACCESS=N
4. Access the IF
→
SP screen and define all INTERNAL PAGEs (1-
8) with "N" for the designated Telrad Tracker Set DN, defined in
Step 1, above.
5. Access the FE
→
AT screen and include the following manda-
tory field definitions:
MAP No.= Button map number defined in Step 2, above.
DAY COS, NIGHT COS, TRAVEL COS - Make sure that each
COS entry is one of the legal classes defined in Step 3, above.
Telrad Tracker Set:
Programmed Buttons
Relevant SD Map
Buttons:
F1
F2
F3
F4
F3
F1
Redial
XFR
HOLD MUTE
F4
F2
Fixed Buttons
.
.
.
.
.
.
