background image

NOTICE

The information in this manual refers to the Telrad DIGITAL family of telephone systems, including the DIGITAL KEY BX system, Re-
lease SBU5 and the DIGITAL 400 system, Release DBU5, August  1997.  Telrad, Ltd., reserves the right to make changes in the 
equipment described in this manual without notification. However, changes in the equipment do not necessarily render this manual 
invalid.

Additional copies of this manual may be obtained from Telrad, Ltd. Reproduction of this manual or parts thereof, without written per-
mission from Telrad, Ltd., is strictly prohibited.

© 1997 Telrad Telecommunications Inc.

Woodbury, New York

The following are registered trademarks of the respective listed firms:

FCC Regulations

Warning

This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruc-
tion manual, may cause interference to radio communications. Operation of this equipment in a residential area is likely to cause harm-
ful interference, in which case the user should contact the Telrad Field Service Department, at the telephone number listed below, to 
correct the interference problem. It has been tested and found to comply with the limits for a Class A computing device pursuant to 
Subpart J of Part 15 of the FCC Rules which are designed to provide reasonable protection against such interference when operated 
in a commercial environment.

Registration

The Telrad DIGITAL Family systems are registered with the FCC based upon compliance with part 68 of its rules. Connection of th ese 
systems to the nationwide telecommunications network is made through a standard network interface jack which you can order from 
your telephone company. Jacks for this type of customer-provided equipment will not be provided on party lines or coin lines.

Hearing Aid Compatibility

DIGITAL family telephones are Hearing Aid compatible, as defined in Section 68.316 of Part 68 FCC Rules.

Telephone Company Registration

It is usually not necessary to call the telephone company with information on the equipment before connecting the DIGITAL family 
system cabinet to the telephone network. But, if the telephone company should require this information, provide the following

:

Rights of the Telephone Company

If the system is determined to be causing harm to the telephone network, the telephone company may discontinue your service tem-
porarily. If  possible, the telephone company will notify you as soon as possible. You will be given the opportunity to correct the situ-
ation and you will be informed of your right to file a complaint to the FCC. Your telephone company may make changes in its facilities, 
equipment, operations, or procedures that could affect the proper functioning of your system. If it does this, you will be notified in ad-
vance to give you the opportunity to maintain uninterrupted telephone service.
In the event of an equipment malfunction, all repairs will be performed by Telrad Telecommunications, Inc., or by one of its authorized 
dealers.

Address of repair facility in USA

Telrad Service Center, 135 Crossways Park Drive, Woodbury, NY 11797. Phone: 1-516-921-8300 or 1-800-645-1350.

Trademark

Firm

AT&T

American Telephone and Telegraph Corp.

GTE

General Telephone & Electronics Corp.

UL

Underwriters Laboratories Inc.

FCC Registration Number 
 (on label affixed to cabinet)

- Key system
- Multi-function (Hybrid Key/PBX) system

ARAISR-18430-KF-E

ARAISR-18427-MF-E

Ringer Equivalence Number 
(on label affixed to cabinet)

3.9B

USOC Jack: 

 DB15, RJ2EX, RJ2FX, RJ2GX, RJ2HX, RJ11, RJ21X, RJ48C

Service Order Code (SOC)

- for off premise extensions and all analog trunk cards except the DID card

 9.0F

- for DID cards

AS.2

- for digital trunks

6.0P

Facility Interface Code (FIC):       - Central Office Ground-start trunk

02GS2

- Central Office Loop-start trunk

02LS2

- Direct Inward Dialing

02RV2-T

- Off-premises extension

OL13C

- Primary Rate Interface

04DU9-1SN

- T1 (DIGITAL TRUNK)

04DU9-BN, 04-DU9-DN, 04-DU9-1KN, 04-DU9-1SN, 04-DU9-1ZN

- E&M (TIE TRUNK INTERFACE -- 2-wire)

TL11E, TL11M, TL12E, TL12M

- E&M (TIE TRUNK INTERFACE -- 4-wire)

TL31E, TL31M, TL32E, TL32M

Содержание TRACKER Set



















Отзывы: