5
| Section 3
SECTION 3 |
5
INSTALLATION
Select Studio
Select the correct Studio from the VX Engine or hybrid. Do this by
pressing on the corresponding Line number button. The available
Studios will be listed vertically.
Select Show
Once the Studio is selected, you will be prompted to select the Show.
Once the Show is selected, the available lines will show as available on
the VSet’s display(s).
After this step, your VSet is ready to control calls.
IMPORTANT:
Since certain functions work differently in “Talent” verses “Producer” mode, it is important that your
staff understand that there are two modes, and how to switch between them. This is covered in the
beginning of the next section (User Operation) and again in the menu navigation section.
