SECTION 5 |
16
MENU BUTTON
Auto Dial Timeout
When dialing using ENBLOC (remember the GO Button), the number dialed will automatically dial after the
specified amount of time if the GO Button is not pressed. When this function is set to Disabled, the VSet will wait
until the GO button is pressed before executing a call. If you are using the VSet with an iQ6 or Hx6, you are not
using ENBLOC dialing and therefore this feature does not apply.
Prompted Drop/Hold
With this function enabled, the VSet will display an action prompt
when two or more calls are unlocked and the Drop or Hold button is
pressed. It will then wait for you to select the call with its correspond-
ing Line Button before executing.
Disable this function if you want all unlocked calls to be affected at
once when the Drop or Hold button is pressed.
Ringer In Headset
Enable this function if you are using a headset with the VSet and you wish to hear an alert in the earpiece when a
call comes in.
Brightness
This item allows you to control the brightness of the display. Use the + and – soft keys to adjust.
Volumes
This item takes you to the Volumes Menu where all of the volume controls for the VSet can be found.