Telos ProSTREAM, Руководство пользователя

Страница: 20 / 38

12
| Section 3
Limit:
The limit bar graphs monitor the level to which the processor is engaging gain reduction in the post-process
audio for each the left and right channels.
The meters only analyze the signals and aid in adjusting the specific parameters needed to achieve desired
aural results. The processing displays are capable of providing a wide range of information, but is not
recommended to set up processing based on using ears to judge the sound, not specified meter indications.
Omnia Processing
The dynamics processing algorithms in use in the ProSTREAM are based upon Omnia Audio’s highly
successful Omnia.3net, which is a hardware-based DSP audio processor. ProSTREAM performs internal
calculations on the source audio with precision sufficient to guarantee 24-bit dynamic range.
ProSTREAM’s processor effects can be monitored via the front panel when set to Status .
ProSTREAM employs the following Omnia processing architecture:
♦
Wideband AGC
♦
3 Band Combined Compressor/Limiter
♦
HF EQ
♦
Adjustable Bandwidth Lowpass Filter
♦
Final Look-Ahead Limiter
♦
Processing Preset Editor