Telos ProSTREAM, Руководство пользователя

Страница: 17 / 38

PROSTREAM CONTROLS |
9
Network Menu
The ProSTREAM is equipped with two RJ45 gigabit network ports marked LAN [Local Area Network] and
WAN [Wide Area Network]. The networking settings of the ProSTREAM are of IPv4 conventions and must
be assigned an IP address before the ProSTREAM will communicate with any other devices.
If Livewire IP audio is to be used as a source instead of the rear-mounted XLR inputs, the LAN port must be
connected and assigned an IP address on the Livewire audio network. Encoded audio can be delivered via
either the LAN or WAN port
The settings available in the ProSTREAM configuration options contain independent settings for the
separate WAN and LAN networks. Each port can be configured with the following settings:
♦
Mode:
The Mode of the network port can be set either to Auto (DHCP), Manual, or Disabled. In Auto mode, the
network port must receive it’s IP address via broadcast from a DHCP server elsewhere on the network.
When in Auto mode, assigned settings from the DHCP server will be visible in the following settings,
but will be unable to be changed. The assigned IP address will be needed in order to connect to the
internal web configuration interface. In Manual mode, all configurations must be entered manually. If a
network port is unused, the port should be set to Disabled.