34
| Section 4
To enable this functionality, enter the IP address of the “other” iQ6 and select which line(s) are to be
shared.
You may also, select which lines are Priority lines. Priority lines are used for studio hotlines and will not be
blocked by the Busy All function.
The bottom of the Show Setup has a new feature set that is introduced with the VX series of products. A
phone book of ten numbers can be added and each entry can be given a name. These values are used
in the VSet phones.
4.2.5 Livewire Audio
The Livewire page has configuration options for the two hybrids and the single Program on Hold (POH)
input. The two Hybrids require unique channel numbers to be assigned. The number can be anything from 1
to 32767, and is unique to your Livewire network.
The Mode drop down box currently has only one choice - Livestream. No configuration is needed here.
The Livewire Destination is configured for you. If there is a need to configure the Destination portion of the
iQ6, select the “Expert Mode” link.
For the POH input, a typical input would be Program 1 from the Axia iQ console.
The front display of the iQ6 will indicate if each Livewire input is active. The bottom left of the display will
show the Livewire icon when a stream is valid or a circle if the requested stream is not valid. There are three
indicators. The first is Hybrid 1 input, followed by Hybrid 2 input, and last the POH input.
