Telos Alliance Linear Acoustic SDI XNODE, Руководство пользователя

Страница: 38 / 60

29
| Section 4
SDI I/O Page
The SDI I/O page is where the SDI output streams are created.
Figure 31 - SDI I/O page with single SDI output enabled
Bypass
This control engages the relay bypass, which directly connect the SDI Input and the SDI Output.
Note!
When the SDI xNode is powered off, the relay bypass is automatically engaged in order to prevent
breaks in the signal path, ensuring that the broadcast stays on-air.
Embed
The Embed control page enables embedding audio into the SDI output stream. All 16-channels of the SDI output
stream are available for embedding, pair shuffling, and pass-through.
Out
This column represents the audio channels of the output SDI stream. The signal source to be embedded into the
SDI output will be selected from the same row. The audio being embedded into the SDI output can be selected from
any L destination or from the input SDI stream.
L/AES67 Destination
L destinations 1 through 8 can be routed to, and embedded into the SDI output stream, on a pair by pair
basis.
SDI Input Channel
Audio pairs from an input SDI stream can be routed to the SDI output. Pair shuffling from SDI Input to output may
be performed.
Mute
These controls mute the individual channel pairs within the SDI Output stream.