Telos Alliance Linear Acoustic SDI XNODE, Руководство пользователя

Страница: 19 / 60

10
| Section 2
Front Panel Displays and Indicators
The front panel OLED provides several different status and configuration screens, along with the Power and Status
LED. The description and definition of those displays are below.
Power and Status LED
The Power LED located on the front panel is a multicolor LED and changes its color to indicate the status of the
power source(s) applied to the SDI xNode.
Color Description
Green Powered by the primary AC Mains power supply (IEC inlet)
Yellow Powered by both AC Mains and redundant power input
Red Powered by external 12 VDC redundant power
Home Screen
The initial screen displayed after boot up is this home screen. It identifies the unit as the SDI xNode, the software
version in use, and the internal temperature of the unit. After approximately 20 seconds, the display will change
over to the Audio Meter display for Source/Destination 1 – 4.
Figure 10 - Home Screen