10.8
If it later is required to change the number of revolutions stored in the memory, push the
ZERO-
button
(3)
for some seconds and the previously registered numbers are erased. This is confirmed by
two lighting points in the display.
10.9
STORAGE PLACE.
At the storage place the bales should be placed systematically. Start at the right-hand side, and
stack to the left. The machine is lowered, but not all the way down to the ground.
The rollers must
not hit the ground.
Push control
"ROLLERS OUT" (7)
and the bale will rest on the ground. Drive
the tractor carefully away from the bale. Try to avoid touching the bale with the rollers. The plastic
film will now tear off by the perforation at the cutter. Place the next bale to the left of the first one
so that the loose film end on the last ball will be locked. Then you do not have to leave the tractor
cab to fasten the loose film end. To be sure we recommend that you check that the film ends are
securely fastened, and eventually fasten them a little bit better when you have stacked the bales.
If the machine is front mounted, the bales can be staked upon each other. (See more in chapter 3.0).
* Emergency stop: see chapter 2.1
29
Содержание AUTO WRAP 1200 EH
Страница 40: ...HAVE YOU GOT ENOUGH TRAINING ABOUT THE MACHINE FROM YOUR DEALER YES NO 44...
Страница 41: ...45...
