Fig. 4-5
4.8
CHECK LIST.
Before using the machine it is recommended to follow this check list:
1.
Make it a habit to discharge the oil-pressure before connection or disconnection of the
hydraulic hoses. (By operating the hydraulic control lever inside the tractor). (Use the tractors
hydraulic control lever).
2.
Return-oil should be led as directly to tank as possible. Beware that if the counter pressure
is too high, the security valve on the main block will release some oil. (See chapter 14.3).
3.
Hose with
BLUE CAP = RETURN OIL.
4.
Hose with
RED CAP = PRESSURE.
5.
Tie up loose hoses so that no squeeze damages occur.
6.
Remove the locking bolt that holds the wrapping arm to the frame during transport. (Fig. 4-5).
7.
Make sure that the plug-in contact from the remote control is connected to the socket on the
machine.
8.
Start the tractor and try out the functions. A bale is not required for this test.
9.
Check all connections, hoses and couplings. If there is any oil-leakage, it should be rectified
immediately.
If any problems should occur, it is most likely that the failure is in the quick-couplers on the
tractors pressure and return-connections.
They can be very narrow and work badly after some years.
Make sure that both the male and the female-couplers opens properly for the oil flow.
Check
them carefully. The best thing to do is to exchange the quick-coupling on the return side and arrange
a
"free return".
Your AUTO WRAP bale wrapper has been tested in practical operation in approx. 2 hours at
the factory.
* Emergency stop: see chapter 2.1
13
Содержание AUTO WRAP 1200 EH
Страница 40: ...HAVE YOU GOT ENOUGH TRAINING ABOUT THE MACHINE FROM YOUR DEALER YES NO 44...
Страница 41: ...45...
