tellefsdal AUTO WRAP 1200 EH, Руководство пользователя

Страница: 15 / 41

Fig. 6-1 Fig. 6-2
6.0 MOUNTING OF PLASTIC FILM.
6.1 When the plastic roll shall be mounted, you have to hold the prestretcher-rollers aside, Hold the rollers
aside and put on the holding hook. (See fig. 6-1).
6.2 Place a reel of film on to the prestretcher's holding axle and put on the springloaded lock.
6.3 Pull the film between the rollers on the prestretcher in the direction of the arrow. (See fig. 6-2).
(See also the sign on the wrapping arm).
6.4 The filmholder / cutter opens by pushing CUTTER OPEN , (5), on the remote control block.
Pull out the film and place it over the U-shaped slot.
6.5 Push the CUTTER CLOSED -button, (4), and the film will be held in the U-shaped slot.
6.6 HEIGHT ADJUSTMENT OF PRESTRETCHER / PLASTIC FILM.
The plastic film shall hit at the middle of the bale wrapped, and therefore it can be necessary to adjust
the height of the prestretcher. (See more about this in chapter 10.2).
If you use 500 mm plastic on a 750 mm prestrecher, then you can use the two distance sleeves to
adjust the height on the plastic roll. There can be mounted one sleeve on each side of the plastic roll,
or both sleeves can be mounted above or below.
* Emergency stop: see chapter 2.1
15