Tellabs 6325 Скачать руководство пользователя страница 41

Страница: 41 / 80

MA365 • Rev. A2

Tellabs

6325 Edge Node

3 Reference Information

Fan module

The figure shows the front of the fan module with the synchronization and
alarm connector.

3.2

Logistics

Subrack items

The following subrack items are available for the Tellabs 6325 node.

Modules

The following modules are available for the Tellabs 6325 node.

Description

Item number

SC2 subrack. The following items are delivered
with the subrack:

• Adaptation brackets NS-0296 for 19 inch rack

• Adaptation brackets NS-0297 for ETSI rack

• Cover plate for slot 6

• Extraction tool kit TOOL-H031 (includes mod-

ule reset tool)

• M4 x 8 screw and washer to attach ground

wire

UC3560

Cover plate for empty slot 2, 4 or 5 (position for
traffic module)

NS-0292

Cover plate for empty slot 8 (position for PS-DC
module)

NS-0295

Description

Item number

SIMX16 (SDH optical I/F module & cross-con-
nect)

CM3568

SIMX4 (SDH optical I/F module & cross-connect) CM3567

SPIMX (SDH optical I/F and PDH I/F module &
cross-connect)

CM3563

PIM1, 21 x 2 Mbit/s (E1) tributary, 120 Ohm

CM3566

CMCC, Central management and communica-
tions control module

CM3564

PS-DC module

CM3561

Содержание 6325

















































































Результаты поиска

Содержание 6325

Отзывы:

Tellabs 6325, Руководство по установке оборудования, Страница: 41 / 80

Результаты поиска

Содержание 6325

Отзывы: