43
Voice call notification
:
In this section you can configure phone calls to be made when the given service event occurs.
The device will call the selected phone numbers and play the selected voice messages.
Voice messages can be uploaded in the
“
Voice messages
” menu, or recorded as per the
instructions in the list of DTMF commands found in chapter “
Remote control and status query
by DTMF commands via phone call
Voice call
: in this section you can select the user phone numbers to which calls should be
made. The phone numbers should be configured in advance in the “
Reporting channels
” menu.
Calls will be made to the numbers enabled with the help of the checkboxes in the drop-down list.
Voice message
: in this section you can select the voice message which should be played in the
calls when the given event occurs. When receiving a call from the device, a built-in siren tone
will be played before each voice message. If a voice message has been configured for which no
message has been recorded, the siren tone will be played continuously throughout the call.
Text-based notifications
:
In this section you can configure text-based messages to be sent when the service input event
occurs.
SMS notification
: in this section you can select the user phone numbers to which SMS
message should be sent when the given event occurs. The phone numbers should be
configured in advance in the “
Reporting channels
” menu. The text message will be sent to the
numbers enabled with the help of the checkboxes in the drop-down list.
Push notification
(Pager4 PRO only)
:
in this section you can select the mobile devices to which
Push notification should be sent when the given event occurs. The mobile devices should be
configured in advance in t
he “
Mobile devices
” menu. Push notification will be sent to the mobile
devices enabled with the help of the checkboxes in the drop-down list.
E-mail notification
(Pager4 PRO only)
:
in this section you can select the addressees to whom
e-mail should be sent when the given event occurs. The e-mail addresses should be configured
in advance in the “
Reporting channels
” menu. E-mail will be sent to the addressees enabled
with the help of the checkboxes in the drop-down list.
Message
: in this field you can enter a custom message of maximum 45 characters, which you
wish to send to the selected phone numbers, mobile devices or e-mail addresses when the
given service event occurs. The device will send the same message for each notification
channel (SMS, Push, e-mail).
The device is capable to insert various dynamic data in the text of the message using variables.
The device will automatically replace the variable written in the message with the data related to
the given variable, when it sends the message.
Available variables:
$name
: the event name configured in the device for the given event
$in1
…
in4
/
in6
: the actual state of the given contact input (0=idle, 1=activated)
$rel1
…
rel2
: the actual state of the given relay output (0=idle, 1=activated)
$ps
: the momentarily measured value of the supply voltage
Camera
(Pager4 PRO only): in this section you can select the IP camera which you wish to
assign to the given event. IP cameras should be configured in advance in the “
IP cameras
”
menu. If you have configured an e-mail notification for the given event, the URL of the IP camera
assigned to the event will be sent along with the message in the given e-mail.
Click “
OK
” to accept the changes or “
Cancel
” to quit without saving.