11
4.2.2 Remote connecting to devices via cloud service
This connection type can be used if the Pager4 device you wish to connect remotely to,
can use the cloud service. For this, the APN settings should be configured in the
“General” settings menu and it is also necessary to have installed into the device a SIM
card with available mobile Internet service which uses public APN, or, if using a private
APN, accessing the cloud server IP address should be enabled in the given APN.
If the “
Cloud usage
” option is enabled and the cloud server availabilities are configured in the
same menu, the device will be continuously online, so it can be accessed at anytime via the
cloud server. Otherwise it will only connect upon request sent by SMS, as mentioned below.
With this connection type, connection between the device and the
Pager4
programming
software will be established through the cloud server operated by the manufacturer.
The “
System logs
” option of the programming software cannot be used in case of remote
connection over the Internet.
Admin password
: the security password of the device (default superadmin password:
1234
).
Server address
: the IP address of the cloud server (default:
54.75.242.103
).
Port
: communication port number of the cloud server (default:
2020
)
Device ID
: the device identifier of the
Pager4
device to which you wish to connect.
The format of this unique, burned-in during production and thereby unchangeable device
identifier used for cloud connection is:
FF:FF:FF:FF:FF:FF
(6x2 hexadecimal characters).
You can read the device ID of the given device in the “
Device ID
” section of the “
Status
monitoring
” menu, when connected to the device. The device will also send its device ID as a
reply to your request for connecting to the cloud server, sent by SMS to the device, about which
you can read more below.
Connecting to the device through the cloud server:
Enter the connection password.
o
Super administrator permission: full access to all settings. (Default password:
1234
).
o
Administrator permission: full access to all settings except device identification settings.
o
Connecting remotely without a password is not possible.
Select the “
Cloud
” option in the “
Connection type
” section.
Fill in the “
Server address
”, “
Port
” and “
Device ID
” fields.
