Telindus 1031, Руководство пользователя и справочник

Страница: 238 / 394

Telindus 1031 Router Chapter 10
Reference manual Configuration attributes
228
10.5.6 Priority policy configuration attributes
The priorityPolicy object is not present in the containment tree by default. If you want to use priority policy,
then add this object first. Refer to 4.4 - Adding an object to the containment tree on page 45 .
telindus1031/router/priorityPolicy[ ]/algorithm
Use this attribute to determine how and which queues are emptied.
The algorithm attribute has the following values:
Value Description
fifo
This is a First In First Out queue. The data that enters the queue first, also leaves
the queue first. This is the fastest but most superficial queuing mechanism.
roundRobin
This is a priority queuing mechanism. In this case, all user configurable queues
containing data have an equal weight. In other words, if all the user configurable
queues contain data, they are addressed in turns. However the low delay queue
and system queue still have priority over the user configurable queues:
Default:fifo
Range: enumerated, see below
Queue Priority
1 - 5 : user config-
urable queue These queues are addressed in turns.
6 : low delay queue This queue is addressed between every user config-
urable queue.
7 : system queue This queue has priority over all other queues. As
soon as it contains data, it is emptied.