Telindus 1031, Руководство пользователя и справочник

Страница: 171 / 394

Telindus 1031 Router Chapter 9
User manual Configuration examples
161
9.2 LAN extension over a Frame Relay network
In this example, a remote office is connected to a central office over a Frame Relay network.
A modem link connects the remote office to the Frame Relay network. At the local office a Telindus 1031
Router is installed. The central router is a third party router.The Frame Relay network uses LMI accord-
ing to the ANSI standard. No Reverse ARP is supported by the network.
The configuration of the Telindus 1031 Router in CLI format is as follows:
Router
(+ modem)
modem
IP subnet 192.168.47.0
mask 255.255.255.0
network
LAN interface:
IP = 192.168.47.254 LAN interface:
IP = 192.168.48.254
IP subnet 192.168.48.0
mask 255.255.255.0
WAN interface:
IP = 192.168.100.1
mask = 255.255.255.252 WAN interface:
IP = 192.168.100.2
mask = 255.255.255.252
DLCI19
action "Load Default Configuration"
SET
{
SELECT lanInterface
{
LIST
{
ip =
{
address = 192.168.47.254
}
mode = routing
}
}
SELECT g703[1]
{
SELECT channel[g703_1]
{
LIST
{
encapsulation = frameRelay
}
SELECT frameRelay
{
LIST
{
dlciTable =
{
[a] =
{
name = dlci1
ip =
{
address = 192.168.100.1
netMask = 255.255.255.252
remote = 192.168.100.2
} frameRelay =
{
dlci = 19
}
}
}
lmi =
{
type = ansiT1-617-d
}
}
}
}
}
SELECT router
{
LIST
{
routingTable =
{
[a] =
{
network = 192.168.48.0
gateway = 192.168.100.2
}
}
}
}
}
action "Activate Configuration"