TELIKOU
MS-800 Eight-Channel Main Station
3
follows:
ON: Send the audio from selected microphone to the ANN. OUT rear back,
the switch is self-locked.
OFF: Break the connection between selected microphone and ANN.OUT
rear back.
PTT: Send the audio from selected microphone to the ANN. OUT rear back,
release and reset.
4. Call Switch
Send call signal from host to the selected channel which talk switch (2) is ON.
Turn up or down the handle of call switch, the LED (15) above selected channel
will light (RED). This switch is without self-locking function, release and reset.
5. Tone Alert Level Control
When MS-800 receives a call signal from beltpack or other stations, an internal
buzzer will send a hum to panel speaker and earphone. This knob adjusts the hum
level.
6. Mic Select Switch
Set the Mic select switch to select whether the panel microphone or the headset
microphone is active.
7. Panel Mic Connector
This is a double-purpose connector, supports both of microphone with XLR plug
and 1/4inch plug.
The wiring of 3-pin XLR microphone is as follows:
Pin 1 -- Mic common
Pin 2 -- Mic hot
Pin 3 -- Null
8. Headset connector
4-pin XLR Male or 5-pin XLR female connector
EARPHONE: Dynamic 50-2000 ohm
MICROPHONE: Dynamic 100-600 ohm
The wiring of headset is as follows:
Pin 1--Mic common
